If you would like to leave us a comment please go to
The Maintenance of UV Printer Flatbed
First of all, ensure that the surrounding environment of the uv printer flatbed is clean. Too much dust in the working environment can lead to poor lubrication of the guide shaft of the uv printer flatbed, and the movement of the print head in the printing process is blocked, thereby causing the printing position to be inaccurate or the mechanical frame is impacted to cause damage. When the print head is not turned back to the original position and the printer is turned on again, the printer first causes the print head to return to the original position, and then the operation of the cleaning head is performed, thereby causing unnecessary waste of the ink. The solution to this problem is to rub off the dust on the guide shaft, and to lubricate the guide shaft. Here we suggest choosing more liquid lubricating oil, such as sewing machine oil.
Second of all, make sure the uv printer flatbed has a solid working platform and do not place anything at the top of the uv printer flatbed. When printing, the front cover must be closed to prevent dust from entering the machine, at the same time, avoid other hard objects entering into the machine to hinder the movement of the printer. Do not plug and unplug the printer cable, which will damage the printer print port and PC parallel port, and even damage the PC motherboard. If the print output is not clear, use the printer's automatic cleaning function to clean the sprinkler, but in this way, it will consume a small amount of ink. If the printing is not satisfactory after several consecutive cleaning, the ink may have been used up and the cartridge needs to be replaced.
Third of all, when the cartridge is not used, it is best not to remove, so as not to cause ink waste or printer measurement of ink errors. because after changing the cartridge, the printer will fill the ink delivery system. And this process in the shutdown state will not be able to carry out, the printer cannot detect the re-install on the cartridge. In addition, some printers measure the ink capacity using electronic counters inside the printer. When the counter reaches a certain value, the printer determines that the ink is used up. And during the cartridge replacement process, the printer will reset its internal electronic counter, thus confirming the installation of the new cartridge. As for the uv printer flatbed grating bars, a good job of protection is highly recommended. Don't touch it by hand, don't let it get dust, in case the positioning is not correct.
The last but not the least, before the shutdown, bring the print head back to the original position. The uv printer flatbed automatically returns to the original position in the suspended state. In this way, the printer can avoid the ink of waste ink when the printer is re-cleaned at the time of the next startup. Because the spray head can be sealed by the protective cover in the initial position, the spray head is not easy to block.
小泽玛利亚 樱井步 苍井空 石黑京香 桃谷绘里香 白咲舞 川岛和津实 黑泽爱 樱井步 小泽爱丽丝 七濑茱莉亚 樱朱音 原千寻 若菜奈央 稻森丽奈 尾野真知子 友田真希 花野真衣 雪本芽衣 雨宫真贵 冲田杏梨 高阪保奈美 霞理沙 泽井芽衣 北野望 桃谷绘理香 橋本凉 波多野结衣 仁科百华 柚木提娜 长泽梓 大沢佑香 天海翼 前田香织 前田香织 二宫沙树 铃木里美 希崎杰西卡 麻仓优 麻美由真 原更沙 葵实野理 上原瑞穂 福山沙也加 铃木麻奈美 西野翔 神谷姬 希志爱野 琴乃 希崎杰西卡 秋元里奈 原干惠 杏树纱奈 佐藤遥希 Sato Haruki 前田香织 二宫沙树 仁科百华 樱木凛 秋元里奈 小泽爱丽丝 原纱央莉 浅井舞香 音羽雷恩 天海丽 大泽佑香 百合野もも 里美尤里娅 铃原爱蜜莉 美竹铃 吉沢明步 吉泽明步 早川濑里奈 美竹凉子 松岛枫 佐佐木希 樱井梨花 立花美凉 小泉彩 里美尤里娅 铃原爱蜜莉 美竹铃 松岛枫 佐佐木希 朝美穗香 上原结衣 纹舞兰